YOUR BROKEN SCOOTER

Thom Cat

Thom Cat

Silver Member
of course im gonna replace the deck. but this week all week i have been working on a v2. I cant stand to see broken decks, and when poeple say all decks break. I consider that a challenge. It is my ultimate goal to build an unbreakable deck or I will die trying, I will never give up and i will never accept that all decks break. this week I oderd a new welding rod it is the most expecive rod that money can buy it is also the highest grade and strongest. other companys wont use it because it cost five times more. the rod we were using cost $5.00 a pound and this stuff cost me $25.00 per pound it is NOT available at any welding shop I had to drive to washington to get it. This rod was made to be used by Boeing on Jets. I have aslo impoved the venting to make heat treating more thorough. I have also oderd die changes to the extrution.
on another note yes we are strugling. our first year we sold 1500 decks. this year we are down to 200 deck sales. so I have to work another job to pay my bills. I dont make any money from TSI. I have been doing this for free.
 
AaronGidman

AaronGidman

Member
Thom Cat said:
of course im gonna replace the deck. but this week all week i have been working on a v2. I cant stand to see broken decks, and when poeple say all decks break. I consider that a challenge. It is my ultimate goal to build an unbreakable deck or I will die trying, I will never give up and i will never accept that all decks break. this week I oderd a new welding rod it is the most expecive rod that money can buy it is also the highest grade and strongest. other companys wont use it because it cost five times more. the rod we were using cost $5.00 a pound and this stuff cost me $25.00 per pound it is NOT available at any welding shop I had to drive to washington to get it. This rod was made to be used by Boeing on Jets. I have aslo impoved the venting to make heat treating more thorough. I have also oderd die changes to the extrution.
on another note yes we are strugling. our first year we sold 1500 decks. this year we are down to 200 deck sales. so I have to work another job to pay my bills. I dont make any money from TSI. I have been doing this for free.
Click to expand...

this was the most legitiment response to this whole thing.
 
CoryR

CoryR

Silver Member
Thom Cat said:
of course im gonna replace the deck. but this week all week i have been working on a v2. I cant stand to see broken decks, and when poeple say all decks break. I consider that a challenge. It is my ultimate goal to build an unbreakable deck or I will die trying, I will never give up and i will never accept that all decks break. this week I oderd a new welding rod it is the most expecive rod that money can buy it is also the highest grade and strongest. other companys wont use it because it cost five times more. the rod we were using cost $5.00 a pound and this stuff cost me $25.00 per pound it is NOT available at any welding shop I had to drive to washington to get it. This rod was made to be used by Boeing on Jets. I have aslo impoved the venting to make heat treating more thorough. I have also oderd die changes to the extrution.
on another note yes we are strugling. our first year we sold 1500 decks. this year we are down to 200 deck sales. so I have to work another job to pay my bills. I dont make any money from TSI. I have been doing this for free.
Click to expand...

I remember yo talking to robert about the unbreakable deck, and when that comes, some people will say it wont, some will ride it, and some will forcefully try to snap it, i will ride it, until i stop riding
 
Casey DeHaven

Casey DeHaven

Steel Member
Thom Cat said:
of course im gonna replace the deck. but this week all week i have been working on a v2. I cant stand to see broken decks, and when poeple say all decks break. I consider that a challenge. It is my ultimate goal to build an unbreakable deck or I will die trying, I will never give up and i will never accept that all decks break. this week I oderd a new welding rod it is the most expecive rod that money can buy it is also the highest grade and strongest. other companys wont use it because it cost five times more. the rod we were using cost $5.00 a pound and this stuff cost me $25.00 per pound it is NOT available at any welding shop I had to drive to washington to get it. This rod was made to be used by Boeing on Jets. I have aslo impoved the venting to make heat treating more thorough. I have also oderd die changes to the extrution.
on another note yes we are strugling. our first year we sold 1500 decks. this year we are down to 200 deck sales. so I have to work another job to pay my bills. I dont make any money from TSI. I have been doing this for free.
Click to expand...
I have so much respect for you and your company it's not even funny
 
Stackies

Stackies

Steel Member
:like:
Thom Cat said:
of course im gonna replace the deck. but this week all week i have been working on a v2. I cant stand to see broken decks, and when poeple say all decks break. I consider that a challenge. It is my ultimate goal to build an unbreakable deck or I will die trying, I will never give up and i will never accept that all decks break. this week I oderd a new welding rod it is the most expecive rod that money can buy it is also the highest grade and strongest. other companys wont use it because it cost five times more. the rod we were using cost $5.00 a pound and this stuff cost me $25.00 per pound it is NOT available at any welding shop I had to drive to washington to get it. This rod was made to be used by Boeing on Jets. I have aslo impoved the venting to make heat treating more thorough. I have also oderd die changes to the extrution.
on another note yes we are strugling. our first year we sold 1500 decks. this year we are down to 200 deck sales. so I have to work another job to pay my bills. I dont make any money from TSI. I have been doing this for free.
Click to expand...
 
iliveinahouse1

iliveinahouse1

Bronze member
Thom Cat said:
of course im gonna replace the deck. but this week all week i have been working on a v2. I cant stand to see broken decks, and when poeple say all decks break. I consider that a challenge. It is my ultimate goal to build an unbreakable deck or I will die trying, I will never give up and i will never accept that all decks break. this week I oderd a new welding rod it is the most expecive rod that money can buy it is also the highest grade and strongest. other companys wont use it because it cost five times more. the rod we were using cost $5.00 a pound and this stuff cost me $25.00 per pound it is NOT available at any welding shop I had to drive to washington to get it. This rod was made to be used by Boeing on Jets. I have aslo impoved the venting to make heat treating more thorough. I have also oderd die changes to the extrution.
on another note yes we are strugling. our first year we sold 1500 decks. this year we are down to 200 deck sales. so I have to work another job to pay my bills. I dont make any money from TSI. I have been doing this for free.
Click to expand...

i wish every company was as legit as TSI. if that was to happen, scootering as a sport would be more recognized
 
CoryR

CoryR

Silver Member
0903121146.jpg
 
Tyler Rehard

Tyler Rehard

Bronze member
Jake D said:
that picture is gonna ruin TSI's rep, but they also did it themselves. don't get me wrong, I support them. but every deck besides the flight and the threshold has been terrible, the headtube angle makes 90% of people puke and the weight doesn't help either. one reason I wont get a TSI even though everyone says theyre amazing now is because i'll always remember those crappy feeling decks. hope they somehow stay afloat and keep making decks like the threshold though
Click to expand...

i disagree that all other tsi decks besides the flight and threshold are bad im curently riding a flowmaster and it is THE best feeling deck i have ever ridden you just have to get used to any tsi and you will never want to ride another companys deck
edit because i saw this
Thom Cat said:
of course im gonna replace the deck. but this week all week i have been working on a v2. I cant stand to see broken decks, and when poeple say all decks break. I consider that a challenge. It is my ultimate goal to build an unbreakable deck or I will die trying, I will never give up and i will never accept that all decks break. this week I oderd a new welding rod it is the most expecive rod that money can buy it is also the highest grade and strongest. other companys wont use it because it cost five times more. the rod we were using cost $5.00 a pound and this stuff cost me $25.00 per pound it is NOT available at any welding shop I had to drive to washington to get it. This rod was made to be used by Boeing on Jets. I have aslo impoved the venting to make heat treating more thorough. I have also oderd die changes to the extrution.
on another note yes we are strugling. our first year we sold 1500 decks. this year we are down to 200 deck sales. so I have to work another job to pay my bills. I dont make any money from TSI. I have been doing this for free.
Click to expand...
make that 201 the next deck im buying is going to be a tsi without a dobut no other deck feels as good as yours thom- tsi till i die man i will always suport you guys
 
W

Whip-Zonee

Steel Member
TYLEERR.R. said:
i disagree that all other tsi decks besides the flight and threshold are bad im curently riding a flowmaster and it is THE best feeling deck i have ever ridden you just have to get used to any tsi and you will never want to ride another companys deck
edit because i saw this

make that 201 the next deck im buying is going to be a tsi without a dobut no other deck feels as good as yours thom- tsi till i die man i will always suport you guys
Click to expand...

Respect iz duh biggest ing guz ok? We gotz 2 respect tsdie Kk plox?
 
You must log in or register to reply here.
Top