Griffiths007
Bronze member
sand the laquer of and then just pick at it with your nail.
YOUR SCOOTER
- Thread starter the_SD_local
- Start date
Shaun Walton
Bronze member
Feeling like I should post up an update. Been some time.
Grips - Worn out, Light Blue ODI Longnecks
Barends - Animal Plugs
Bars - MGP Batwings, 22.5 (23.5 w/spacers) high, 21 wide
Clamp - SZ Oversized
Headset - Cane Creek S-1 Sealed (few years old)
Fork - GRIT Threadless
Compression - H.I.C.
Deck - MGP Nitro Rawed (previously purple)
Brake - Homemade steel flex fender, dual bolts
Front Wheel - 110 Phoenix F-1 (3 spoke)
Back Wheel - 100 Phoenix Integra (6 spoke)
Front Peg - Shortened Blue Tilt Peg (not shown)
Back Peg - Socket & Spacer (level with deck side)
Bearings - Stock ABEC 5, mixed with some others
Bumpin
Scooterguy13
Member
Odi blue grips.
Homemade pry-bars
Fsa headset
District double clamp(Getting blunt quad clamp)
Yak metal cores
Abec 5's (SHOULD I GET ABEC 7'S OR 9'S??)
Phoenix flex brake
Mgp vx2 pro deck
morgan_bvrns
Steel Member
Haven't posted in a few weeks and just got new grips today.
Schlongnecks
RAD OGs
PROTO SCS
Cane Creek SC1
PROTO Striker, first run
Lucky Pro 4.5 w/Razor Pro Headtube
Madd/Blade Brake
Slippers
Schlongnecks
RAD OGs
PROTO SCS
Cane Creek SC1
PROTO Striker, first run
Lucky Pro 4.5 w/Razor Pro Headtube
Madd/Blade Brake
Slippers
Grant Schofield
Silver Member
Whip untill hopefully Tommrrow
Serious? Wow.
morgan_bvrns
Steel Member
Whip untill hopefully Tommrrow
If you're getting a new deck I wouldn't mind buying that for a few bucks. I've always wanted a box re'd B/Pro model. Got into the sport too late to ever have one.
Parker AZ
Bronze member
Whip untill hopefully Tommrrow
Pirate Reo's?
evanlikescooter
Bronze member
Whip untill hopefully Tommrrow
i would ride this over any setup on the last 3 pages.
Dom Marconi
Silver Member
Take the foldy plate off, as well as the insides of the headtube. Might as well just ride it until it breaks. It's a nice deck.
Whip untill hopefully Tommrrow
Grant Schofield
Silver Member
Really? i thought you only need to take it of becasue you couldnt run inward fork or seniors when the plate was on
If you think that in sense, the sides can't tighten to the headtube because the plate is preventin it.
Dom Marconi
Silver Member
The front plate is holding the foldy plates in place. Take it off so that the foldy plates will compress against the neck.
Steve Moore
Steel Member
Anyone else notice this thread has over 2 million views?
