Ask Questions Here

M

mrmoe344

Member
ok i got another noob question when u order bars...(buff bars) whats the width of the bars mean? like the height is how tall they are then is the with the actual part where the grips go or what??
 
M

mat

Steel Member
width is how WIDE the bars are. like, how long the crossbar is (the one on top with your grips on it). its pretty much how far apart you want your hands to be. a stock scooter is is 13" or so, most people like them a little wider and around shoulder width. some people ride really wide ones though.
 
R

RyanV

Member
Is it better to bump a thread or make a new one? Also, is there any rule against bringing up old threads? If there is, then how old is too old?
 
C

Chris Picone

Member
mrmoe344 said:
i have 2 questions

will 125mm wheels fit on a standard razor pro model??

and do the SR Buff Bars and 1 piece bars(that arent out yet) fit on a standard pro model?
Click to expand...

125s require a 125 SR fork. And those kinda don't exist anymore. If you have one by all means run the yak 125 but otherwise you can't.

Yes on the second one. Any bars pretty much fit on a pro model fork.

JonDogg said:
wat is the difference between a briflip and scooterflip and forward brflip and forward scooterflip, also wats a slider?? thanks
Click to expand...

A briflip is a scooterflip with an x-up in it so you don't have to let go of the bars. I think a slider is getting out of fakie by pivoting on the ground, like a revert. I think.
 
M

mat

Steel Member
this is why you got banned, you dont know what the fuck your talking about and you give bad advice to those who dont know any better.
 
The Batman

The Batman

Steel Member
Staff member
Hey is there any chance Andrew can make another Old SR shirt? Mine got too small and I wish I could get a medium or somthing.
 
Z

zprestoe

Member
yeh noob questioon aha


is it un healty for a scooter iuf you bolt it??

i know how good it it becasue now it never moves.
but now my a is bending in where the boltsa arre/
 
M

mat

Steel Member
you mean the folding mechanism right? yes its good, everybody does it. look in the sticky threads in the scooters section to make sure you did it right.



has anyone ever had a scooter team/company called tanks or tank scooters?
 
J

James Scown

Steel Member
Well when you have threadless forks, you cant screw your bars onto them right?

The compression system is inside the forks and goes into your barstem and grips onto that. When you tighten the bolt in the forks for the compression system, it pulls them closer together so its tight :)
 
Z

zprestoe

Member
JonDogg said:
wat is the difference between a briflip and scooterflip and forward brflip and forward scooterflip, also wats a slider?? thanks
Click to expand...

briflip is flip around your body two hands
scooter flip is flip it around your body with 1 hand and the handle spins through your fingers
forwards are just exactly the same just from behind your body around the front

Nick. said:
ok noob question
but what does "ftw" and "btw" stand for?
Click to expand...

ftw. f--- the world
btw by the way
 
Z

zprestoe

Member
mat said:
you mean the folding mechanism right? yes its good, everybody does it. look in the sticky threads in the scooters section to make sure you did it right.



has anyone ever had a scooter team/company called tanks or tank scooters?
Click to expand...


yeys thanks ive done it all right its just my a deck mech is bent ahah

dub post. sorry
 
J

Jamie Gantz

Steel Member
why the heck do they they make the forks like that on an A2? Instead of the fork going into the hedtube, it has a black pad thing inbetween the headtube and fork. Is that better? I hope I explained it well enough.
 
S

Seth C.D

Member
Queston, how do i make my avitar and signiture have a picture in it. i have tried what it says in the update your account place but they both just come up with white boxes with a red cross in them. What is happening?
 
You must log in or register to reply here.
Top