u sure the card doesnt say kmart on it
my brother works in Kmart and his works in target, officeworks, myer (I think) And my favorite, BI-LO! lol
blunt scooters?
- Thread starter peachster2
- Start date
my brother works in Kmart and his works in target, officeworks, myer (I think) And my favorite, BI-LO! lol
Looks soo good
I wanna get some, which are best, strippers or the purple ones?
Also, Justin, what other colours will you get?
id advise strippers there sick as i tested my earlier today Love
also there the sweet ist feeling bars ive ever used, tucks, no handed suicide, bar spins all so dame good with them
Mr Blunt i Official Love Stripper's they even look like a tong/Bikini Front Dame SXC
mitchwashere53
Mitch Baldry
yeah id advise locals near rampfest to head there today asap
we will have the candy bars & morw Mr T & Strippers next week with other new products more colours also
the Purple Mr T are not back sweep or Up sweet there T style with a strong as guesst, well all blunts gussets are the bomb
but yeah the strippers just so good like bmx bar feel but not gay like kota bars
BART ENDER
Member
i've just heard from a friend that mike baldry bent his blunt bars in five minutes and one hard landing is this true
the kid that told me said the the tube the bars is made from is really thin and not as strong as seasoned or mutts moly bars can some one let me know before i waste my money
the kid that told me said the the tube the bars is made from is really thin and not as strong as seasoned or mutts moly bars can some one let me know before i waste my money
well well well
Mitchy used bend Mutts bars too, whats your point there, cause every thing breaks, like at skate & bmx stuff & then compare that industrys prices for most of it cause of brand labels
anyway i tryed break the bars there strong as any thing, ive got strippers testing at moment, basicly thats why i ride these days to quality asure products we sell
Blunts bars are sick as, i dont think any ones going have problems bending them, if mitch did in 5mins maybe it was a defected bar possible was left out of the heat treading process
anyway the bar walls are the same as any other brand i have DISTRICT, ULTRA Bars, Fresh Co Aussie Bars, i dont have seasons or mutts here test but there are the same, mutts & season seem have thicker powder coat thats all, Blunts are lighter then my districts i have in the same sizers
My strippers no way are they bending soon, i do fly outs almost 1.8meters high out of the flat when air & i sum times bail & drop basicly the scooter is thown to the gound hard, hits the bars, wheels forks deck all time Nothing is broken or bent i use, i actualy broke my GO-PRO camera mounts nearly all them before any bars or any thing bent now GO-PRO's are for base jumping & rally or mx racing yet it broke on my scooter from 2 impacts
anyway Upsweep & down sweep i will look soon on net to see how measure the correct size, there basicly like BMX bar feel with minor sweep not hard core like bmx bars, but they feel like them cause the cross bar isnt perfect horizontal i Love my strippers as said before, sorry you guys just all have wait till a local has sum then you will agree, Mutts & seasons are a thing of the past & costing those companys too much make so then the rrp isnt worth it, blunts bars are the best ive seen in this industry so far no doubt bout that
the Acutal Material Blunt use's is the Highest Quality 4130 on this PLANET, ALL Quality BMX Brands Use the Same Tubes from the Same Please that Makes it from Bare Earth Materials, Mutss, Season Cant compare there 4130 blunts theres no way its even close to being the same in quality as what blunt & bmx brands use, Razor ultra 4130 steel is worse the the oz bars again Blunts welds are neater & if not as strong stronger then hand welded bars from oz
the wall thickness is 0.70" thats .05" thicker then Most USA 4130 bars
its 1.80mm Thick tube
not just the colours & names, the actual design & feel is alsum, the Mr T are basicly like Wee bars but the gusset is so much neater & it is a triangle not just a cut bit of pipe under the cross bar , T bars Dont have the BMX sweep style, i just checked they seem have downsweep like district bars, I think this is a design factor to make it strong, ANYWAY how bout every one waits to the website tells you all the info, Basicly we stocked the first released products ones on inside blog & that things we have sum details of
Mitchy used bend Mutts bars too, whats your point there, cause every thing breaks, like at skate & bmx stuff & then compare that industrys prices for most of it cause of brand labels
anyway i tryed break the bars there strong as any thing, ive got strippers testing at moment, basicly thats why i ride these days to quality asure products we sell
Blunts bars are sick as, i dont think any ones going have problems bending them, if mitch did in 5mins maybe it was a defected bar possible was left out of the heat treading process
anyway the bar walls are the same as any other brand i have DISTRICT, ULTRA Bars, Fresh Co Aussie Bars, i dont have seasons or mutts here test but there are the same, mutts & season seem have thicker powder coat thats all, Blunts are lighter then my districts i have in the same sizers
My strippers no way are they bending soon, i do fly outs almost 1.8meters high out of the flat when air & i sum times bail & drop basicly the scooter is thown to the gound hard, hits the bars, wheels forks deck all time Nothing is broken or bent i use, i actualy broke my GO-PRO camera mounts nearly all them before any bars or any thing bent now GO-PRO's are for base jumping & rally or mx racing yet it broke on my scooter from 2 impacts
anyway Upsweep & down sweep i will look soon on net to see how measure the correct size, there basicly like BMX bar feel with minor sweep not hard core like bmx bars, but they feel like them cause the cross bar isnt perfect horizontal i Love my strippers as said before, sorry you guys just all have wait till a local has sum then you will agree, Mutts & seasons are a thing of the past & costing those companys too much make so then the rrp isnt worth it, blunts bars are the best ive seen in this industry so far no doubt bout that
the Acutal Material Blunt use's is the Highest Quality 4130 on this PLANET, ALL Quality BMX Brands Use the Same Tubes from the Same Please that Makes it from Bare Earth Materials, Mutss, Season Cant compare there 4130 blunts theres no way its even close to being the same in quality as what blunt & bmx brands use, Razor ultra 4130 steel is worse the the oz bars again Blunts welds are neater & if not as strong stronger then hand welded bars from oz
the wall thickness is 0.70" thats .05" thicker then Most USA 4130 bars
its 1.80mm Thick tube
not just the colours & names, the actual design & feel is alsum, the Mr T are basicly like Wee bars but the gusset is so much neater & it is a triangle not just a cut bit of pipe under the cross bar , T bars Dont have the BMX sweep style, i just checked they seem have downsweep like district bars, I think this is a design factor to make it strong, ANYWAY how bout every one waits to the website tells you all the info, Basicly we stocked the first released products ones on inside blog & that things we have sum details of
mitchwashere53
Mitch Baldry
hey man i rode my bars for a full day with a small forktube and a shit clamp they barely bent, but i now have a new set of bars And have absolutly raped them and they havnt bent.
Should point out that the whole team went shooting yesterday and not one bar had a problem in the whole range. Even when Brendon cased a MASSIVE dipped 3 over the second set at Hill n Dale.. This should have bent any bar!
BART ENDER
Member
ok thanks guys.
i think I'll wait to see them for myself before i part with my money though. both of you have a reason to promote the stuff. everyone who has a sponsor say their stuff is the best. but most of it ends up being crap. i have not ever heard or seen a picture of a bent seasoned or mutts crome moly bar so hearing about a bent blunt bar so soon is not a good sign i don't think. blunts prices are great but? so far the australian made brands do seem to be the bars that last the longest to me
sorry
i think I'll wait to see them for myself before i part with my money though. both of you have a reason to promote the stuff. everyone who has a sponsor say their stuff is the best. but most of it ends up being crap. i have not ever heard or seen a picture of a bent seasoned or mutts crome moly bar so hearing about a bent blunt bar so soon is not a good sign i don't think. blunts prices are great but? so far the australian made brands do seem to be the bars that last the longest to me
sorry
nitroRCs
Member
Dude, any bars would bend if you have a TINY forktube like Mitch did. A small fortube puts a shitload of stress on the bars and if they only bent a little, thats awesome.
Anyways, im sure as more people get them ect ect, we will get reviews and then that will tell us whther there good or not... IMO there sick from what ive seen and heard.
Anyways, im sure as more people get them ect ect, we will get reviews and then that will tell us whther there good or not
... IMO there sick from what ive seen and heard.
Steele.M
Bronze member
How big was the fork tube like what umm the size of a defiant clamp or what cause i got spacers on mine to make the bars higher and want to know if they will bend if the fork tube is really small
Dude, any bars would bend if you have a TINY forktube like Mitch did. A small fortube puts a shitload of stress on the bars and if they only bent a little, thats awesome.
Anyways, im sure as more people get them ect ect, we will get reviews and then that will tell us whther there good or not
i had i tiny fork tube cause district headtube & my older forks i got, well the bars r ok the fork tube top now bent, had these forks for 2 & half years now
mitchwashere53
Mitch Baldry
you want me to take a picture of mutts chromoly bars bent? Do you also reckon brendon smith would be riding blunt bars if they bend easy? nil.
the fork tube i was using was a mgp sig series fork and and i was using a mutts quad clamp. the forks didnt reach to the second slot on the clamp, and i also bend the muts clamp downwards...
BART ENDER
Member
Blunt Scooters
Member
Yo, Blunt here.
Guys, we have never said our stuff is bomb proof... however after this weekend, Im starting to think it just might be, our crew where going nutts!
Yeah Mitch's bar bent like 2 degrees due to a shit setup (last week). He showed me and he had no more then 1cms of fork tube coming into the bars. WTF
For those who know anything about leverage, they will understand.
Oh and for those who think this is a desperate attempt to defend our products.. lol nah, I just wanted to give Mitch shit about trying to do what he dose with a setup like he did.
For a sneak peek of what went on this weekend.. check out Brendon Smith that owning Hill n Dale box jumps, and Adom Rouse street riding in Melb CBD.
Blunt
Guys, we have never said our stuff is bomb proof... however after this weekend, Im starting to think it just might be, our crew where going nutts!
Yeah Mitch's bar bent like 2 degrees due to a shit setup (last week). He showed me and he had no more then 1cms of fork tube coming into the bars. WTF
For those who know anything about leverage, they will understand.
Oh and for those who think this is a desperate attempt to defend our products.. lol nah, I just wanted to give Mitch shit about trying to do what he dose with a setup like he did.
For a sneak peek of what went on this weekend.. check out Brendon Smith that owning Hill n Dale box jumps, and Adom Rouse street riding in Melb CBD.
Blunt
Blunt Scooters
Member
'not cheap Asian stuff" Buddy...... Would you call Fit Bikes a cheap Asian product? colony BMX bikes cheap asian product? or subrosa bikes cheap crap? Our parts are getting made in the same factory that Eastern Bikes are made in, and from the same metals and technics. I don't know about you, but I'd ride a Eastern in a heart beat!... As for getting what you paid for? go on buy a steel T bar at $100 a pop, that has been welded with a back yard welder, no jigs, no heat treating and metal you find at your local hardware... Ask your Dad now what's better value.
Anyway, not having a go man... Use them don't use them couldn't careless... just please don't post on the net the first negative thoughts that come into your head... an insane amount of hours and effort has gone into this company and all for the right reason. Don't shoot us down until you have seen yourself.
Peace,
Blunt
Anyway, not having a go man... Use them don't use them couldn't careless... just please don't post on the net the first negative thoughts that come into your head... an insane amount of hours and effort has gone into this company and all for the right reason. Don't shoot us down until you have seen yourself.
Peace,
Blunt
BART ENDER
Member
i thought seasoned and mutts were legit companies not back yard welders. the kids in tassie that are riding them are more than happy. i have not heard 1 complaint from anyone i know about them. i dont know anything about bmx bikes or where they come from. but my dad has read what you said and says he would rather spend a bit extra on and australian made product than something from asia. and we should be supporting australian made stuff. i dont think it was a first negative thought i posted just what i heard. and my dad says that your attitude of you couldn't care less probably sums up what your company is all about.