Deck Super Low??

[Alex Donaldson]

A Have A Razor A2 And Its Bolted And All Stock.

For Some Reason The Front End Of The Deck Is Extra Low To The Ground. I Have Tightened The Bolts And Everything In That Area. I Cant Get A New One Beacuse I'm broke And Getting A RUP for Christmas.

If You Have Any Ideas,Its Very Appreciated

Peace,

 

[Chris Weik]

imj pretty sure thats just what those decks do

 

[Justin Vogelsberger]

is your front wheel smaller than your back? and your head tube angle might be like 70 lols

 

[Alex Donaldson]

umm im not sure,there stock razor wheels,would getting new ones help you think?

 

[Justin Vogelsberger]

just put em next to each other and see what one is bigger, put a pic of your scoot up

 

[Anthony_Q]

dude just wait for christmas lol. its in 2 weeks. the reason the front end is so low is because the headtube is fucked up where the bolt is. its a new razor A theres nothing you can do about it.

 

[Alex Donaldson]

well i was just seeing if there was a way to fix it before that because im going to this sick park over the weekend

 

[alec logan]

put on some promod wheels, it should help

 

[DavidCronin]

my deck was like that, its the bolts, i had a 110 in the front and a stock wheel worn the heel out on the back and it was still lower in the front

 

[Anthony_Q]

put on some promod wheels, it should help

no it wont. the problem has nothing to do with the wheels

 

[Alex Donaldson]

its like 1 inch clearance haha

 

[matr!]

Get a really old wheel off a friend or something and put it in the back

 

[Ian P]

dude anthony after what you and rob did to codybrient i have to say this.... anthony Q and rob are super legitlyawesomelybeatiful

 

[Rob.]

erm, what did i do exactly? lol.

 

[Ian P]

he scammed that kid out of a lucky wheel i just spent like an hour of my life reading the whole thing

 

[Ryanscoot]

Haha me too.

 

[BrandonWeir]

Alright that has nothing to do with the thread haha.

Make sure you didn't bolt it all retarded. If you can see that theres more room for the bars to be pushed forward, then you bolted it retardedly.

 

[nwscoot]

Ok here is what you need to do..

1. put scooter in boat
2. tie rope to scooter
3. drive boat to center of lake
4. throw scooter in lake

A2 make incredible boat anchors

 

[Jeremy Dalgliesh]

post a pic of it or just do what he said ^^^

 

[matr!]

Considering they weigh about 2 grams I'm not sure that fact is correct...