defective razor pro-models.

[Ethan Spence]

yeah, i got a promod for X-mas and my bars wouldnt go all the way down. so i took my fork and head tube apart and i found that the hole above the threading on my scooter was smaller than my head tube, so my head-tube would not go through. So that is why the bars would not go all the way down. Is this normal or should Razor know about this?????

 

[skavenger]

http://www.andrewbroussard.com/e107_plugins/forum/forum_viewtopic.php?356953

I think your having the same problem he was??

 

[Aploudre]

where they pulled up all the way

 

[AX3D]

No they made the forks thicker. the T-tube cant go all the way through, in other words you cant reinforce your forks with t-tubes anymore.

 

[Ethan Spence]

well i found it kind of weird. So i took a hack-saw to it =)

 

[me1]

The bars should, come all the way down. At least, thats what makes sense. And do you really need to have them at like 14" or whatever all the way down is? If you do, you must be short, and short equals less weight, less weight means less damage, so you could be on a new A. Unless you do ridiculous gaps and drops. And bold, is old. People are free to argue on the new A thing though.

 

[Ethan Spence]

no i wasnt trying to reinforce, i was trying to put my bars all the way down

 

[Ethan Spence]

i wasnt puting it all the way down, but i ride about like 17" or 18"

 

[Aploudre]

there is a button on the side

 

[qwxor]

i got my pro model and the fork looked skinny as shit and it looked uber weak so i reinforced it =(

 

[Hayydennn]

i have the same problem(my bars wont go down all the way)

 

[team_punishment]

http://www.andrewbroussard.com/e107_plugins/forum/forum_viewtopic.php?349113

i posted it like a week ago, search before you ask questions

 

[metrocardscheme]

i ordered one yesterdayyy!!!!=]
cant wait

 

[Brian Boston]

Solution. Take the T tube off ( just remove the clamp and pull the bars out) saw a few inches off the T tube, and put it back on.

 

[ScootingFred]

I want to see pics of the new pro mods, becuase I got one for christmas, and its the old pro model.

 

[Jordan Jasa]

The bars should, come all the way down. At least, thats what makes sense. And do you really need to have them at like 14" or whatever all the way down is? If you do, you must be short, and short equals less weight, less weight means less damage, so you could be on a new A. Unless you do ridiculous gaps and drops. And bold, is old. People are free to argue on the new A thing though.

they stop at like 2 inches above the bottom.

and you're right about the new a thing, they are actually pretty good for me and wouldn't be too bad to someone who reinforced it and welded the mech. but its harder to do scooter fakies and hang fives, mainly because of the mech rails.

 

[huskylax29]

i broke my new a when i had one in like a week. i way 97 pounds. new a's are terrible

 

[Ethan Spence]

Solution. Take the T tube off ( just remove the clamp and pull the bars out) saw a few inches off the T tube, and put it back on.

yea i did that after i got bored of Xbox live.