Envy Aos V2 Problem

[Bobby R]

Yer so i recently got a Aos V2 and i put it on but i have to make it tight so i don't get headshake but when i don't have any headshake my forks don't spin at all.
I'm not 100% sure but i swear it's because my Phoenix Phorx, my friend tried it with a different headset and everything but it didn't work also he also had Phoenix Phorx.
Is this a known problem or is there something i'm doing that's idiotic?

 

[AndyNguyen]

Could be the crown race? Or its bent so its rubbing against the headset.

 

[Bobby R]

Could be the crown race? Or its bent so its rubbing against the headset.

I'm not sure about that, i've tried taking it off and putting the crown race back on but it didn't help at all.

 

[gjdadj]

the headset 'hat' ? might be wrong, otherwise the crown race, or the headset may be in upside down.... idk. its the prosess of elimination dude.

 

[marcetto99]

my freind had this problem with the same forks and deck, sand down the bottom side of the top cap

 

[Carson .]

You have to have the whole same exact headset or it's weird. Happened to me

 

[Aidan Burns]

Do you have spacers inbetween the bearing and the top cap? If you dont the top cap grips to the head tube and doesn't allow the headset to spin.

 

[Bobby R]

Alright i'll try the sanding down part guys, thanks alot for the tips.
@ Aidan yes i have the compression ring in there.

 

[JayWatt]

With Envy Decks they are designed for the Envy Headset and they come with 2 small spacers that go in between the top cap and top headset.

 

[Aidan Burns]

You need something other than the compression ring. There should be 2 spacers inbetween the compression ring and top cap.

 

[Bobby R]

Oh didn't know that, i just got it to work without the top cap and it's fine.