OKay, so i have a stock razor pro headset, and i took it all off to reinforce my forks, and when i put the headset back on, i either tighten the dust cover thing too much and the deck doesn't spin, or the dust cover is too loose and the scooter wiggles back and forth in the headtube as i ride. I geuss i could just get a new headset and maybe that would solve the problem, but does anybody have any suggestions me until i get the new headset???
Headset Problem
- Thread starter jgmurch
- Start date
reuben furzedown
Member
you didot why did you take of your headset to reinforce your forks? are you running a sealed headset? my guess is that you have taken of your crown race and forgot to put it back on, put it on the bottom of your fork.
Brian Boston
I got myself banned.
Can you read? He said he is running a stock razor headset.reuben A L said:
You just need to fiddle with it and get it in the right spot. Make sure the bearings are in there correctly. Maybe use some thread locker on the nuts if you want to.
reuben furzedown
Member
yeh is your race on the bottom of the fork?
Spicy McHaggis
Steel Member
make it tight enought to where it spins a 360 and once you put the bars on it will have more momentum and spin very sexily
lukeakascooter
Bronze member
tighten the headset bolt so its fairly tight then spin your bars on clamp it in palce then lock the headset bolts against the steer tube then it should be ok.
reuben furzedown
Member
lol i am such a n00b i feel special Now i got owned by brian boston.
ok, sorry to bring this thread back up but i am still havinhg trouble with it. ive tightend it to the point wher it is really stiff when i tailwhip and stuff like that, but it still wiggles. is the bolt keeping my fork on loose and is my headset screwed up??? also, does anybody have this problem with a headset that they bought?? like a cane creek??