Help with "_______" Part

R

Rosco

Member
the bit that sticks out where it usually joins the deck that is nearly a 90 degree corner. Just watch the vid this has been asked already
 
Matt Dibble

Matt Dibble

M3MB3R
Staff member
Nick Lowry said:
Q: Where abouts on a Blade/Madd brake do you need to grind down so that it fits good on a pro model?
Click to expand...

Read first post, this question has been asked already. Look in Scooter Modding Super thread ---> then to video tutorials.
 
D

demo

Member
well matt there have been like 4 thread that started.. about stupid question like this one.. so what do we do..??
 
TomK

TomK

Super Moderator
Staff member
YOu shut the f*** up and gtfo if you dont like the thread just dont look at that thread.
 
D

demo

Member
ummn i kinda made the thread with matts mod power and he manages it but yeah look at the first sentence in it.....
 
A

agent99

Member
Measuring up the height for one piece bars - My question is where do I start measuring from? The headset, I presume, but I could be wrong...

Thanks in advance.
 
D

Devon Garcia

Member
BARS.jpg
 
Chaseme37

Chaseme37

Member
alright here's a question: how the freak do you get bearings OUT of metalcore wheels? I broke my bearing while riding (long story) and I have to put a new bearing in, but I can't get the broken one out!
 
D

daltonkennon

Steel Member
well if the whole bearing is still together (not just the silver ring) then take and allen wrench, stick it inside the other side at an angle so its pushing on the other bearing and hit it on the ground a couple times.
idk if that made sense, haha, but it works.
if its the ring, then idk, wayy too hard.
 
Chaseme37

Chaseme37

Member
that made no sense haha

but the whole bearing is still intact, it's just the metal casing got thrashed during a wreck somehow and it was preventing the balls from spinning. I just got a screwdriver and after some work I pried the metal casing off and now it spins fine, it just doesn't have any casing. any idea on how to press a new casing on? preferably plastic?
 
J

JonnyJonDogg

Member
jeeeez, chase, so many times its taken me to get my bearings out, u gotta kinda use an allen key to wiggle the bearing around, and at the same time try push it out the other time
 
Z

zprestoe

Member
I had the same problem with my metal core, i just snapped it out,
and apparently, if you put a lighter to the bearing hole, on the metall, it will pop it out,
but i have never tried it.
 
Matt Dibble

Matt Dibble

M3MB3R
Staff member
ChandleR said:
you just want a sticky dibble.
Click to expand...

if you weren't an idiot you would've read the first post.
if this became a sticky like EVERY OTHER USEFUL THREAD people wouldn't read it.

I want people to start reading sticky threads, and to start using search. And this thread is to stay non-sticky because most questions about parts can be found there, and for things that aren't there, there is this thread.

And just, by the way, i can make any thread a sticky thread... so "wanting a sticky thread" could be a possibility very easily if i felt like clicking 1 button. However, that's not what this thread is for at all. I want to have something here to help people.
 
You must log in or register to reply here.
Top