Help!!

[Jack Cronin]

I just bought a v2i and my slider wheel wont fit between the spacers

 

[Phillip]

do you have the spacers in right. there is a certain way to put them in. the longer thinner end needs to go into the ruber part

400th post!

 

[Jack Cronin]

yeah it just wont go in

 

[Connorh333]

Your bearings arent in all the way.

 

[Jack Cronin]

Your bearings arent in all the way.

yeah they are cause i could barely get the spacers pasts the PU but i got em in for now

 

[robtom123]

i thought my wheel wasnt fitting once but i put the brake in too far and that means that the spacers arnt perfectly in line with the holes to put the axle through try moving the brake back a little?

 

[nicnic]

 

[gjdadj]

yeah, get those things^^^^

 

[Maz.]

This happened to me too, just keep trying and be quite forceful, also you have to be patient

 

[benjiiscool]

I had this problem. Put your brake halfway in and have the black rubber part sticking out. Then put the wheel between your spacers. then smack the brake with a hammer or some wood until the spacers and wheel are aligned with the holes in the deck. Don't go to far cuz it's a pain to pull the break out.

 

[MattThomMakesMeWarmInside]

I just bought a v2i and my slider wheel wont fit between the spacers

Take a double bastard file (or just a regular metal file if you have it) and sand it down a little bit on both sides. No big deal, I had to do it with my inward forks forever ago.