how to remove striped bolts for clamp?

[joker44]

how can i do it mine r strpied

 

[Noah.]

hammer a flat head into it if it is a alen

 

[joker44]

so it makes a grove and then twist it out?

 

[Noah.]

yah basicly it get stuck in ther and u twist it out

 

[Snyder]

no no no no. cut the middle of the bolt with a hacksaw and one side will pretty much fall out and the other side will unscrew very easily.

 

[joker44]

its a district clamp it doesnt stick out

 

[Noah.]

try my way first its easer and quick and if that doesnt work use snyders method

 

[joker44]

kk...

 

[undialeddavid]

no no no no. cut the middle of the bolt with a hacksaw and one side will pretty much fall out and the other side will unscrew very easily.

i thought if u cut it then the right side of the bolt will get stuck in the clamp forever?

 

[AshleyPowell]

i thought if u cut it then the right side of the bolt will get stuck in the clamp forever?

Only if you cut it flush with the clamp. Because once its cut it loses it tightness/compression/pressure, and you can take it off and then you unscrew with your fingers or pliers.

 

[mattyts]

Are the threads stripped or the head?

 

[undialeddavid]

my bolt stripped for my baby scs and the bolt dosnet hang out practicly at all and the head is stripped. wat do i do.

 

[Cheezel]

youll have to buy a new bolt but to get it out get a drill bit that fits in side the bolt than drill through thant it will just fall out

 

[jackscoots777]

get out mr. solid himself, the anglegrinder