Lowering the bars on the Razor Ultra Pro

[Wemixz]

Hi!
I ordered a razor ultra pro a few days ago, with the highest bars.
Is there any way to lower theese? Because 19" is quite high to me.

Thanks

 

[gerkin of honour]

well, if you have a drop grinder thing then you can cut it on that and make slits with a hacksaw.

 

[JDBen]

wtf? 19 high?

 

[Tylerr.]

wtf? 19 high?

YEAH! 19 high!

 

[Michael Rankin]

just cut it. its as simple as that

 

[JDBen]

since when were the Lo 19 high!??

and tyler, shut up

 

[jare88]

yeah, i think they're 21. but anyways, just cut a off the amount you need off the bottom with a hacksaw or another tool, and then cut slits about 2" long to allow the bars to clamp on to the forktube.

 

[jhamm32]

cut down. re slit

 

[Wemixz]

Thanks for the comments

and i ment 21"

 

[uk whip]

Cut the bottom of the bars down, if your mega n00b you need a 5mm allen key to undo the clamp and then try and cut the most straightess line you can do on the bottom of your bars then refit them and tighten them so it doesnt move or wobble.
hope it help

 

[saltwater]

Heres a tip if u wanna cut down ur bars with a hack saw, get a spare or old clamp.
Find the height u wantmove ur clamp to that point then tighten the clamp and start sawing right next to the clamp this should give u more of a accurite cut.

 

[JDBen]

I never thought of that, good idea :]

 

[Rob.]

sharpie + measuring tape.
HOLY SHIT!
problem solved

 

[Michael Rankin]

sharpie + measuring tape.
HOLY SHIT!
problem solved

sharpie + measuring tape + hacksaw.
HOLY SHIT!
problem solved

 

[domd]

hey now guys. calm down. we all know cutting bars is rocket science.

 

[redline582]

They are 21 high not 19, and just get a saw lol.

 

[Michael Rankin]

hey now guys. calm down. we all know cutting bars is rocket science.

yeah youre right. i apolagize on behalf of us all.

 

[Devin Catron]

sharpie + measuring tape.
HOLY SHIT!
problem solved

then u just have a sharpie mark on ur bars and its still too tall

 

[Tanner!]

1. search
2. look at results
3. do what the results say

you should be good to go

 

[Josh N.]

Heres a tip if u wanna cut down ur bars with a hack saw, get a spare or old clamp.
Find the height u wantmove ur clamp to that point then tighten the clamp and start sawing right next to the clamp this should give u more of a accurite cut.

loven you right now haha