razor pro stock headset problem.

[Ethan Spence]

ok, so everytime i tighten it too much my bars dont spin. If i tighten it too less my bars spin, but my bars also shake. The only was i can ride is with my bars shaking.... i cant take it anymore...

how would i make them stop shaking and stop comming loose, but still be able to turn my bars good.

 

[Steven_T]

I used to hate when I would have this problem. You just gotta keep fuucking with it. Until you find the perfect spot. Usually, Ill get mine to a point where its pretty solid, and I can get the bars around a couple times. And just tighten it up, and after riding for a while, It will loosen up and spin more, but still be solid.

 

[humpurple kushiones]

i use 3 bolts. the first one it the top of the headset. tighten that alittle more then you want it. put another bolt on ther and make that tight against the first one. same with 3. then put the bars on all the way

 

[Ethan Spence]

i use 3 bolts. the first one it the top of the headset. tighten that alittle more then you want it. put another bolt on ther and make that tight against the first one. same with 3. then put the bars on all the way

?

 

[nate-O.S.K]

ok loosin your head set then pull your fork up as high as you can and then put your bars on then tighten it trust me im like the king of stock headsets lol i used to have a stock headset spin like my c4 does now ;]

 

[scootcb]

ok loosin your head set then pull your fork up as high as you can and then put your bars on then tighten it trust me im like the king of stock headsets lol i used to have a stock headset spin like my c4 does now ;]

okay ill believe a guy that has 19 posts.

 

[Jon.]

lolololololol

 

[humpurple kushiones]

ok loosin your head set then pull your fork up as high as you can and then put your bars on then tighten it trust me im like the king of stock headsets lol i used to have a stock headset spin like my c4 does now ;]

okay ill believe a guy that has 19 posts.

your avatar is you doing a tailwhip bro...

but that dude is obviously wrong and c4 doesnt make headsets

 

[Jon.]

i was just along for the ride

 

[nate-O.S.K]

umm yeah c4 does make headsets lol
i have a c4 top cup sealed and a cane creek tank sealed
and trust me i kno what im talking about i just dont get on a forum often cuz i gots a life =]

 

[zolof]

um no they dont. the only parts c4 makes are bars. and bolts but thats not really making them.. they dont even sell headsets.

 

[Hep Greg]

umm yeah c4 does make headsets lol
i have a c4 top cup sealed and a cane creek tank sealed
and trust me i kno what im talking about i just dont get on a forum often cuz i gots a life =]

lol i think C4 is a cane creek model.. or an aheadset model. something like that.. not an actual C4scooters.com part or something.

 

[NickGraham.]

you might not have on your crown race.
This same thing was happening to me until I found out you needed to have the crown race on.

 

[jgmurch]

i have had this problem and i posted a good thread, but of course, nobody looks. ugghhhhh. anyway, you need to get it tight so it doesn't wiggle but also so it still spins, but you NEED to put on loctite or some other glue that seals threads. i used epoxy, i dont recomend it because it is extremly hard to get the two nuts of again, but it keeps headset solid and there is NO wiggle. it is amazing but use permanent glue at your own risk. oh, and search next time. i think the title was, for people with problems with stock headsets.

 

[Taylor Feist]

just find the perfect place and put lock tight around it

 

[nate-O.S.K]

umm yeah c4 does make headsets lol
i have a c4 top cup sealed and a cane creek tank sealed
and trust me i kno what im talking about i just dont get on a forum often cuz i gots a life =]

lol i think C4 is a cane creek model.. or an aheadset model. something like that.. not an actual C4scooters.com part or something.

yeah its aheadset model lol i told you guys