scs problem

[jordyskoots]

why is it sooo fkn hard to undo the clamp bolts in my scs??? its like really tight. how do ya fix it so its not so tight

 

[BrentBourne]

Muscles.

 

[jordyskoots]

yea 1 wont cum out the allen keys are striping

 

[Michael Rankin]

yea 1 wont cum out the allen keys are striping

Learn to spell. And they don't need to be retardedly tight in the first place. When loosening, just loosen them little by little, going back and forth between them all.

 

[Cristian Castro]

ya^^^^

 

[Rob.]

yea 1 wont cum out the allen keys are striping

I'd cum too if my allen keys started stripping, my tools are very hot.

 

[BrentBourne]

Lmao.

 

[j-DoGg]

wd 40

 

[short_bus_Scooter]

lulz^^^

 

[heyhey]

why is it sooo fkn hard to undo the clamp bolts in my scs??? its like really tight. how do ya fix it so its not so tight

im having a similar problem with mine,but only one of the bolts wont come out.

 

[greg m]

i fell like it would be a good thing for it to be tite??

 

[Zaηe]

New allen key and cloth or foam or something on your palm.

 

[Billie Rainbow]

use physics to your advanage, get good allen keys and use a shifter or pipe on the end

 

[jordyskoots]

yea its only 1 on mine too... im gonna try that stuff

 

[parrish]

u have to stretch them, put a bolt in through the threaded side then put a coin in the slit and tighten it till its streched

 

[edy boi]

i had this happen to mine u put the bolts in 1 at a time if u cant do it with any of the other ways cut the bolt in the middle un screw the allen key half then cut a notch on the other side thats sticking out and undo it with a flathead only way u can do it dude sorry

 

[AndrewG(WMS)]

do u have grease on your bolts? cuz they can get stuck if u didnt put grease on them.

 

[edy boi]

naah the shouldent matter

 

[Rob.]

Nah, grease helps a lot. You know what happens when cars run without oil?
They don't. That's what.

Same thing. Ungreased bolts are going to be much harder to get out than greased ones

I suggest taking the bolts out, greasing them, then putting them back in

 

[mattttyler]

but the whole point of bolts is to keep things in place..and the whole point of grease is to loosen things up and keep them running smooth.

so they dont seem like a good mix?