YOUR SCOOTER
- Thread starter the_SD_local
- Start date
Derek Seay
Member
i think you have to grinddown the corners.
had to be at the shop until 9pm so killed some time with this project.
TSI "Jr." (cut down a TSI deck that was whacked at the rear axle)
4.5 x 18.5
Piece of Diamond Plate for a Brake- too thin but it is what I had on hand and I can just replace it when it breaks. 2 counter sunk bolts hold it on but still had some vibration/rattle so I added the round head bolt you can see
bars reminds me of tanks :/
R-Dubya
Steel Member
specs on request
No matter what scooter I see those forks on, they always give the deck some opposite rake (aka the front sits higher than the back so the deck sits crooked). That really bothers me.
Sebastian Sim
Member
thats probably because the fork is zero offset. forks like that tend to make the front higher.
marc_sk00ts
Member
hey Thom, what headset is that?
marc_sk00ts
Member
oh, and fucking loving the graphic in the bars <3
Thom Cat
Silver Member
Hunter Treviranus
Silver Member
i think its a shadow corvus. this one http://www.danscomp.com/showfullima...SINTEGRATED&image=301055_Highlighter_Blue.gif
edit thom beat me to it
Hunter Treviranus
Silver Member
commentsTraded my blunts for my friends grippers
duo corey martinez grips
odyssey par ends
crows 22 x 20
lucky clamp
spacer
various headsets
french id deck
smx
grippers
tsi flexy
santa cruz griptape
and cool Scooter Garage sticker
marc_sk00ts
Member
thanks 4 the fast answers! =) and yes Hunter, it's exactly this one as i can see from ur link
marc_sk00ts
Member
sorry 4 double posting, but ur scooter is niiiiceeee
I cut off the foot fender and put on a flexy and New Chromo clamp.
It's... beautiful.