Lightest bars AND does FrID ST Bars work with SCS?

[RiccardoM]

You Betcha!

 

[Ellie]

Thanks guys!

edit: what are the lightest and strongest bars though. I dont want the V3 to snap.

 

[Collin.]

Just some advice, I would NOT ride Alu bars with a slit. They'll snap really . And addict bars are out. You can get them, bit district bars are lighter. And tilt forks aren't meant to run ics.
This would be light,
District bars
Tilt full scs
Tilt forks or Phoenix phorx
Addict deck
And sliders are meant for rough ground

 

[Ellie]

Just some advice, I would NOT ride Alu bars with a slit. They'll snap really . And addict bars are out. You can get them, bit district bars are lighter. And tilt forks aren't meant to run ics.
This would be light,
District bars
Tilt full scs
Tilt forks or Phoenix phorx
Addict deck
And sliders are meant for rough ground

Should I go for the Tilt SCS light or regular?

 

[Collin.]

Regular. The light weighs practically the same, but the regular fits oversized and standard bars.

 

[Ellie]

Ok

One more question: if I was to raw the V3's, would they be silver in color or grayish in color?

 

[Collin.]

Silver.

 

[Ellie]

ugh thats lame.

also, I need to order the bars 2 inches shorter then, right?

 

[Collin.]

Where are you ordering from? And the tilt scs is only 3 inches tall. So it would be 1.5 inches shorter not 2. I think your best best is just to order them as is, an cut them to your liking.

 

[Ellie]

ace and eights I don't have a hacksaw or anything like that at home I think.

 

[Collin.]

How tall do want them?

 

[Ellie]

21 once its all assembled

 

[Collin.]

So order them 19.5 tall, with no slit.

 

[Ellie]

Gotcha. Thanks!

 

[Collin.]

You might want them a bit more narrow too, they come like 21 and a quarter wide.

 

[Bobby R]

The Frid Steel Tre Bars have an intergrated clamp, that's why they won't cut them for you but i could be mistaken.
But on the other hand if you want a super light setup.
Addict Deck
District v3 bars
Proto Sliders
Addict headset
Tilt/Phoenix Scs
Tilt forks

 

[RiccardoM]

Phoenix wouldn't work.

 

[Bobby R]

Phoenix wouldn't work.

ah yeah, wasn't thinking about the district bars being aluminum haha, alright then go with an big tilt scs

 

[Collin.]

Yeah, and there was a thread a while back about the steel trees being like an eight too big for regular os clamps and stuff, so that would work unless you use the integrated clamp.

 

[Dom Marconi]

This is the lightest setup you can get.

District V2 aluminum bars
FrenchID light clamp
Blunt Declare fork
100mm VertX Talon wheels
Blunt AOS v2/ Addict deck (not sure which one is lighter)