YOUR BROKEN SCOOTER

Maz.

Maz.

Steel Member
Hahah that bot knows what's up.
and just got here a bit late but you can see how legit matt is replying to all this with that inspirational speech, and after reading the last 5 pages I conclude that Carson is a dick. Un-mod him he can't even be arsed to spell 'you' correctly or use correct grammar he constantly starts shit ie. this whole shit storm, and we will all remember him as that noob dirt clod who got the most hate when he joined here because he shat himself when some dude took more than a couple of days to ship something, how he got to be a mod is a fucking mystery. Ryan should be the only bst mod.
TSI OR DIE. This whole thing makes me want to support tsi even more. I will be getting the threshold.
 
CallumR

CallumR

Steel Member
Thats fucked up, still gonna support tsi till i die
also whip-zone got banned so it doesn't really matter
 
Jordan.

Jordan.

Bronze member
Thom Cat said:
of course im gonna replace the deck. but this week all week i have been working on a v2. I cant stand to see broken decks, and when poeple say all decks break. I consider that a challenge. It is my ultimate goal to build an unbreakable deck or I will die trying, I will never give up and i will never accept that all decks break. this week I oderd a new welding rod it is the most expecive rod that money can buy it is also the highest grade and strongest. other companys wont use it because it cost five times more. the rod we were using cost $5.00 a pound and this stuff cost me $25.00 per pound it is NOT available at any welding shop I had to drive to washington to get it. This rod was made to be used by Boeing on Jets. I have aslo impoved the venting to make heat treating more thorough. I have also oderd die changes to the extrution.
on another note yes we are strugling. our first year we sold 1500 decks. this year we are down to 200 deck sales. so I have to work another job to pay my bills. I dont make any money from TSI. I have been doing this for free.
Click to expand...

Mad respect for you tom, with out a doubt this is going to be my next deck.
 
CoryR

CoryR

Silver Member
Cory Ricklick said:
0903121146.jpg
Click to expand...
bump, Lucky 7's last pic before they snapped and we cut them down
 
Bear Grylls

Bear Grylls

M3MB3R
Maz. said:
Hahah that bot knows what's up.
and just got here a bit late but you can see how legit matt is replying to all this with that inspirational speech, and after reading the last 5 pages I conclude that Carson is a dick. Un-mod him he can't even be arsed to spell 'you' correctly or use correct grammar he constantly starts shit ie. this whole shit storm, and we will all remember him as that noob dirt clod who got the most hate when he joined here because he shat himself when some dude took more than a couple of days to ship something, how he got to be a mod is a fucking mystery. Ryan should be the only bst mod.
TSI OR DIE. This whole thing makes me want to support tsi even more. I will be getting the threshold.
Click to expand...


I'm a universal mod... I monitor BST to
 
Carson .

Carson .

Steel Member
Maz. said:
Hahah that bot knows what's up.
and just got here a bit late but you can see how legit matt is replying to all this with that inspirational speech, and after reading the last 5 pages I conclude that Carson is a dick. Un-mod him he can't even be arsed to spell 'you' correctly or use correct grammar he constantly starts shit ie. this whole shit storm, and we will all remember him as that noob dirt clod who got the most hate when he joined here because he shat himself when some dude took more than a couple of days to ship something, how he got to be a mod is a fucking mystery. Ryan should be the only bst mod.
TSI OR DIE. This whole thing makes me want to support tsi even more. I will be getting the threshold.
Click to expand...

Yeah that couple of days? Funny how I never got it.
 
blackscootdawg

blackscootdawg

Bronze member
Definaltly getting the TSI Threshold when my District V2i snaps!
its less than 2 months old, and the bottom deck/heatube weld is almost all the way grinded through (pegless FS smith grinds FTW) haha
 
B

Broccoli1

Bronze member
Thom Cat said:
of course im gonna replace the deck. but this week all week i have been working on a v2. I cant stand to see broken decks, and when poeple say all decks break. I consider that a challenge. It is my ultimate goal to build an unbreakable deck or I will die trying, I will never give up and i will never accept that all decks break. this week I oderd a new welding rod it is the most expecive rod that money can buy it is also the highest grade and strongest. other companys wont use it because it cost five times more. the rod we were using cost $5.00 a pound and this stuff cost me $25.00 per pound it is NOT available at any welding shop I had to drive to washington to get it. This rod was made to be used by Boeing on Jets. I have aslo impoved the venting to make heat treating more thorough. I have also oderd die changes to the extrution.
on another note yes we are strugling. our first year we sold 1500 decks. this year we are down to 200 deck sales. so I have to work another job to pay my bills. I dont make any money from TSI. I have been doing this for free.
Click to expand...

Nothing is UNBREAKABLE-

enough cycles and the AL will eventually fail and unfortunately AL fails catastrophically- it doesn't just bend- it snaps.

How is the Rod going to improve the strength of the Extrusion? the Neck ripped right out of the deck plate. I know you said this was a defective deck and I'm not trying to bash TSI- I really like the product and as a small business owner I understand the situation you are in.

Decks see an enormous amount of stress in normal use and I've also seen kids throw their scooters when they can't nail down a trick.

I'm not an engineer but just the amount of force applied to a deck/head tube when a kid say... 160-175lbs jumps a 10-12 set of stairs has got to be off the charts for what tolerance of the material is.
 
Grant Schofield

Grant Schofield

Silver Member
Broccoli1 said:
Nothing is UNBREAKABLE-

enough cycles and the AL will eventually fail and unfortunately AL fails catastrophically- it doesn't just bend- it snaps.

How is the Rod going to improve the strength of the Extrusion? the Neck ripped right out of the deck plate. I know you said this was a defective deck and I'm not trying to bash TSI- I really like the product and as a small business owner I understand the situation you are in.

Decks see an enormous amount of stress in normal use and I've also seen kids throw their scooters when they can't nail down a trick.

I'm not an engineer but just the amount of force applied to a deck/head tube when a kid say... 160-175lbs jumps a 10-12 set of stairs has got to be off the charts for what tolerance of the material is.
Click to expand...
It ripped because the weld broke and that was the easiest way to break from there. There would have been no problem if the weld hadnt failed.
 
Lokomoto

Lokomoto

Member
My Nitro has a crack in it. It's really small but I'll probably be getting a Threshold. Hands down, one of the sexiest looking decks out there.
 
D

Dylan Crane

Bronze member
i have no idea why you all are crying over ONE broken threshold plus like he said it was defective... quit crying about its going to ruin TSI because its not, when a orion deck broke did people stop buying those NO, did people stop buying proto wheels hey guess what again? NO! or any other part that broke did anyone stop buying what ever it was that was broke NO! so stop all of your bitching.......
 
instinctscooter

instinctscooter

Silver Member
Cory Ricklick said:
bump, Lucky 7's last pic before they snapped and we cut them down
Click to expand...

you're posts have been completley ignored it seems lol, but it is because a threshold broke which a lot of people did not expect (dont go mad at me now as it was unexpected, at least for me and im not bashing tsi as it was a defect according to the creator and owner of the deck).
 
You must log in or register to reply here.
Top