just tell the owner your comments this company listens to clients unlike sum other oz brands
blunt scooters?
- Thread starter peachster2
- Start date
just tell the owner your comments this company listens to clients unlike sum other oz brands
Blunt Scooters
Member
Hey Blunt here,
We will never say we are perfect.. but what we will say is we will always try to be.
The strippers do have a back sweep, and being so slight - stickers can be put on the wrong side by mistack. We do apologise for this, and we are happy to send out new stickers to those who have brought our bars and this is the case.
We don't want to say it over and over as it loozes its meaning... But this company is all about the sport and the riders. and not in this game for a quick buck. Just ask Justin from SOA and our team who we deal with every day.
Each company that starts out, has a million things to consiter and a dress... and some times little things get missed.
The rattle in the cross bar is a 'spit' from a weld that has entered the middle tube... it happens once out of 1000 bars.
And guys, If you have feed back with problems with our products, please contact us through our website (up in 2 days) we can address them right away then.
See ya in Sydney this week!!
Blunt
We will never say we are perfect.. but what we will say is we will always try to be.
The strippers do have a back sweep, and being so slight - stickers can be put on the wrong side by mistack. We do apologise for this, and we are happy to send out new stickers to those who have brought our bars and this is the case.
We don't want to say it over and over as it loozes its meaning... But this company is all about the sport and the riders. and not in this game for a quick buck. Just ask Justin from SOA and our team who we deal with every day.
Each company that starts out, has a million things to consiter and a dress... and some times little things get missed.
The rattle in the cross bar is a 'spit' from a weld that has entered the middle tube... it happens once out of 1000 bars.
And guys, If you have feed back with problems with our products, please contact us through our website (up in 2 days) we can address them right away then.
See ya in Sydney this week!!
Blunt
djs 2233
Steel Member
bars and wheel are holding up great. theres absolutly nothing wrong with mine. no rattle or anything. im loving em. one of the really good people near my local had a go and they are still perfectly fine. so glad i got the last 550mm ones, perfect height. as for the wheel it rides smooth, no chunks or any sight if de-hubbbing yet. btw are the blunt wheels harder or softer than eagles?
very nice job blunt! cant wait for the rest of the products
very nice job blunt! cant wait for the rest of the products
My bars feel nice for some reason one inch less actually makes a difference... Just incase people were wondering the quality of my bars is top notch, there is only one tiny airbubble in a weld which you can expect from anything. About to take them for a ride and see how they holds up.
most i got on mine is an airbubble from the paintbtw whats with the tiny hole drilled near the top supports of the bars. its on my strippers, if anyone is thinking its an error dont worry its perfectly done so its meant to be there, im just wondering why
I haven't seen any of the products yet but a hole in the cross bar will be to let expanding air out of the bar when welding. If it wasn't there the expanding air would come back out at the ends and cause a few problems keeping the weld constant.
DJ
mitchwashere53
Mitch Baldry
most i got on mine is an airbubble from the paint
the 2 little holes are to release the heat from the welding so it doesnt cause any weak spots. but the 2 holes do nothing towards the performance of the bars.
enjoy
Steele.M
Bronze member
probaly did put used a hammer to push them down cause iv seen the bars and if they can stand up to sketchy flairs and backies that story is a lie
and if you hit these bars with a hammer they dint and they arnt dinted. josh hardy put heaps of cloth over his bars and hit them with a hammer to put the on and they dinted heaps
Blunt Scooters
Member
Haha, yeah I've heard all the stories from both riders and retail owners..... the real funny thing about it all, somehow it was done 3 weeks before any bars where in the country. lol
If you where down at Jamo Jam 2 today and seen how hard our team rode, you would know yourself that these bars are some of the best bars going around and for under $90 damn good value.
Congrats to Brendon Smith on 3rd place.. and to the other Blunt riders, Max, Mitch, Adam and Wazza for killing it today!!
To everyone that played a part in the comp.. Awesome job!
Blunt