clamp is not tightening chromo bars

D

domd

Dom_Dalbert
wait your slits just may be to wide the look humongus. your slits should only be a couple mms wide.
and aaron are yours doing it as bad
 
A

Aaron Huff

Member
Dom Dalbert said:
wait your slits just may be to wide the look humongus. your slits should only be a couple mms wide.
and aaron are yours doing it as bad
Click to expand...

Yep they are. The slits are only a few millimeters wide. I don't really think you know how wide they should or shouldn't be anyways.
 
A

Aaron Huff

Member
No, I broke that. Regardless, I'm using an old A fork. I cut the slits to 2 inches. I even took the lock nut off the headset to gain some extra threads on the fork to see if it would help and it still comes off, only slower. I made a shim for the clamp out of a soda can, and it didn't help. I tried to make a shim for in between the bars and the fork and it wouldn't even fit. My only idea now is to get a different clamp.
 
D

domd

Dom_Dalbert
o.ok well good. luckif you guys want to try another batch let me know cause im ordering some metal in a couple weeks
 
D

domd

Dom_Dalbert
for yuo it is. i dont do the work i just order what i need and give it to somebody else to do it for me.
 
B

blaine142

Member
101_2259.jpg

101_2260.jpg

101_2261.jpg

101_2262.jpg


ok i just measured them and they are 2 inches long.
3/16 wide.
 
A

alexanderespinoza

Member
the best and easiest solution is clamps like DK's these regular stock clamps don't hold because they are meant to clamp aluminum not steel. Soo what this means is that it isn't a strong enough clamp but DK's are completly different using two bolts just fo a "single clamp" hope this solved all problems.
 
You must log in or register to reply here.
Top